General Information: The active power produced by aclive current can alone be luned inlo an effective use for Ihe consumer, while the reactive power produced by (he reactive current does not yield usable power and consequently is not registens;! on the active performance meter. The reae live power has negative effect on the generator, transformer conductor lines, inductive healing and motorchokes while causing voltagedrop and fiscal losses due to additional electric heating. The reactive power required for the creation of the magnetic field round motor, transform»ontlnuously oscillates between current generator and consumers. The more cost effective wjy lo provide the reactive power is to produce is by placing AB8 capacitor close to the consumer of reactive power [Moior/Trasformers|.Tims, relieving the line between generator and consumer of the transport for the reactive portion. This way several more current consumers can be connected to a existing supply system without having to exiend or amplify that system if the capacitor are suitably positioned. Enhancing power quality improvement of Power I-actor saves cost and ensures fast return on investment.FeaturesAll film dielectric is used and consist of polypropylene In ihe form of biaxially oriented film, hazy on both sides, and in two or three layers withlasercutaluminium foil for the electrodes.The Capacitors are Impregnated with a NON-PCS base fluid.Dielectric Lossapprox.0.1 W/KVARABB Capacitors are designed, manufactured and tested to meet the requirments of IS 13925-1994,IEC-60871, Voltage Range- 22KV-24KV Frequency - 50 Hz /60 Hz Corrosion ProtectionMaximum PermlsslbleCurrent [Capacitors units shall be switched (or continuous operation at an RMS current of t .30 times the current that occurs at rated sinusoidal vollageand raled frequency, excluding transients!. Temp range: 5 C- 55°C Decreasing Voltage dropApplication8 Individual PF Correctionindividual PF Correction on three phase motorIndividual PF Correction of power TransformersIndividual PF Correction of group power factor correctionCentral Power Factor Correction ol all industrial /Inductive Loads